LS-WS-3G · 3-gang LoRa wall switch, EU868
Concept — not for specificationPlaceholder values — engineering sign-off pending
Placeholder values — engineering sign-off pending
The figures on this page are not engineering-approved yet. Treat them as indicative only, and do not base a design, procurement or compliance decision on them.
Roadmap
This capability is planned. It is documented here for planning and is not part of the shipping specification.
Subject to availability
A three-gang wall switch that carries three small circuit loads from one position and joins a private LoRa network. Appropriate indoors where a private-network gateway is present and three circuits should be switched independently.
- Three circuits switched independently from a single wall position
- Executes local schedules and manual switching at the wall
- Requires a private-network gateway for schedules and status
- Concept stage — specification subject to change before release
The datasheet for this revision is not published yet. Ask engineering for the current values.(r0.1-draft)
Specifications
| Model | LS-WS-3G |
|---|---|
| Product family | Wall switch family |
| Specification revision | r0.1-draft |
| Supply voltage | 230 V 50 Hz / 60 Hz |
| Maximum load | 10 A |
| Radio band | EU868 |
| Transmit power | 14 dBm |
| Link budget | Placeholder. Concept stage — no measured link data. |
| Measured under | Placeholder — concept stage. |
| Ingress protection | IP20 (indoor) |
| Operating temperature | 0°C … 40°C |
| Standby current | 0.6 mA |
| Firmware | fw-0.1.0 |
| Protocols and interfaces | LoRa (private network) |
| Inputs | 3 x local push button |
| Outputs | 3 x switched mains circuits |
| Mounting | Flush box 60 mm |
| Packaging | Single unit carton |
| Spare parts | — |
| Local control | Gateway required · Cloud for management only |
Offline behaviour
| Requires connectivity | Requires connectivity |
|---|---|
| Works with or without connectivity | Local schedule execution, Manual switching |
| Degraded behaviour without connectivity | Remote status reporting is unavailable until the uplink returns |
Certifications
Coming soon
Compatibility
Compatible with
LS-GW-100LS-GW-300
Notes
- Concept stage. Pairing behaviour is not yet documented.
Availability in your market — Global (English)
Not currently offered in this market
Radio authorisation, electrical approvals or an authorised importer are not in place for this destination. We will confirm the compliance path when you enquire.
Availability follows the market pack, not the language you are reading.